新核心网开站步骤(精)（优秀）_allegro导入网表步骤

新核心网开站步骤(精)（优秀）由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“allegro导入网表步骤”。

关于阿朗CDMA的IPBH基站的整合步骤

主要目的：

因目前新局使用的基站使用IPBH和以前的frame relay方式不同，添加了阿朗的路由交换机7750设备代替了5E同基站连接。根据新局现场（软件是R31版）的测试经验，总结基站部分的内容，方便SUB-C工程师查阅和尽快上手，也为客户准备技术文档。

步骤简介：

根据IPBH基站的特点，主要三个部分步骤： 一，基站硬件安装调测

二，基站和7750确认传输路由的配合步骤 三，基站的数据添加

一，基站硬件安装调测 1)基站硬件安装完毕

2)基站用RMT调测基站背板参数，把Frame 转为PPP模式，主要是在RMT/boot memory parameter窗口中/trunk group controller parameter简称TGCP和initial link configuration parameter简称ILCP/ recall成RMT自带的配置文件/自己电脑中的RMT目录/config/1bts/IEH/BMP/中根据URC功能配置分1X和EVDO两种：

1X的URC是/Voice/URC-URCII/E1/IPBH-Voice/CDM has its owner E1s/TGCP-CDM(1-5-9-13)-IPBH-E1-v4 和/Voice/URC-URCII/E1/IPBH-Voice/CDM has its owner E1s/ILCP-CDM(1-5-9-13)-IPBH-E1-v4

EVDO的URCII是EVDO/URC-URCII/E1/PPP-EVDO/CDM has its owner E1s/TGCP-CDM(2-6-10-14)-PPP-E1-v4 和EVDO/URC-URCII/E1/PPP-EVDO/CDM has its owner E1s/ILCP-CDM(2-6-10-14)-PPP-E1-v4

二，基站和7750确认传输路由的配合步骤 1,7750加数据需要的条件：

1)基站RCS号

2)基站传输编号，主要基站每条传输E1是第几个155M（7750连接40条155M）的第几个时隙（每条155M有63个时隙），需要电信客户传输部门提供 3)基站现场的E1先自环并和7750工程师配合断开测试确认E1正常

Lucent Technologies Inc.-Proprietary Use pursuant to Company Instructions

Page 1 of 11

2,在基站现场确认得到IP地址，网线连接到基站，telnet 192.168.168.16(第一块URC)或192.168.168.32(第二块URC)，执行下面的命令： 用户名：lucent 密码：paword 击入：shell liu1 自动出现背板参数 击入：mlpppShow 检查是否有MY IP和Primary DNS IP 及Secondary DNS IP，这三个IP是7750配置的数据，必须全部是有IP地址的，如为0.0.0.0则基站信令不会起来的，需要联系7750工程师确认或添加数据。

1X检查举例如下：

shell liu1 ----liu1为第一槽位URC，1X部分 Attempting to connect to host liu1(192.168.66.9)...VxWorks login: lucent Paword:

LIU_DEF_1-1-> mlpppShow MLPPP Bundle:0 NCP State:OPENED LCP State: OPENED My IP:6.32.56.30 Primary DNS IP:6.32.8.1 Secondary DNS IP:6.32.12.1 Bundle Id:02062038:1d000000 Active Links: 1 Link:0, LCP State:OPENED, NCP State:OPENED Tx.(peer)Number of Claes:4, Tx.(peer)Multi Cla ENABLED Rx.(local)Number of Claes:4, Rx.(local)Multi Cla ENABLED Fragmentation(Tx.)is ENABLED, seg.size = 450 value = 25 = 0x19 LIU_DEF_1-1-> exit LIU_DEF_1-1-> ping “6.32.8.1” ------ping DNS,如下表明到DNS正常，则信令应该可以正常；

PING 6.32.8.1(84=20+8+56 bytes)[vs=0] 64 bytes from 6.32.8.1: icmp_seq=0.time=10.ms [vs=0] 64 bytes from 6.32.8.1: icmp_seq=1.time=0.ms 101 SHELL EXECUTION COMPLETED DO检查举例如下：

shell liu2 ------liu2表明为第二槽位URCII，DO部分 LIU_DEF_2-1-> mlpppShow

Lucent Technologies Inc.-Proprietary Use pursuant to Company Instructions

Page 2 of 11

MLPPP Bundle:0 NCP State:OPENED LCP State: OPENED My IP:6.32.56.30 Primary DNS IP:0.0.0.0 ---DO URCII DNS为全0 Secondary DNS IP:0.0.0.0 Bundle Id:02062038:1d000000 Active Links: 2 Link:0, LCP State:OPENED, NCP State:OPENED Link:1, LCP State:OPENED, NCP State:OPENED Tx.(peer)Number of Claes:4, Tx.(peer)Multi Cla ENABLED Rx.(local)Number of Claes:4, Rx.(local)Multi Cla ENABLED Fragmentation(Tx.)is ENABLED, seg.size = 450 value = 25 = 0x19 LIU_DEF_2-1-> ping “6.32.5.1” --DHCP地址，需要从设计里查，能ping通则DO信令应该可以正常；

PING 6.32.56.29(84=20+8+56 bytes)[vs=0] 64 bytes from 6.32.56.29: icmp_seq=0.time=0.ms [vs=0] 64 bytes from 6.32.56.29: icmp_seq=1.time=0.ms LIU_DEF_2-1-> [01-01 00:06:18Z] 0xfc39b30(tExcTask): 50f29c vxTaskEntry

目前在武汉出现问题及处理：

1，mlpppShow 没有出现MY IP字符。请检查背板参数PPP设置；

2，mlpppShow MY IP为0.0.0.0，请与7750和SDH核对传输通路，以及让7750检查配置；

3，1X URC mlpppShow MY IP已经分配IP地址，但不能ping通DNS，请拔插URC；

4，DO1X URC mlpppShow MY IP已经分配IP地址，但不能ping通DHCP，请检查RNC DHCP配置；

特别提醒：在重启URC时请断开电脑网线连接；

简明步骤如下：

1，上电检查传输，如有传输告警请与7750环回测试，如果不能7750换回，请联系传输部门环回测试；

2，传输正常后请连接RMT将BPSN报告给数据工程师； 3，RMT修改URC和URCII背板参数为PPP方式； 4，RMT上传F2914DBGA.00版本；

5，断开RMT网线，拔插URC和URC-II；

6，连接网线，telnet 192.168.168.16，shell liu1检查1X IP和DNS；如果获得IP则ping DNS；shell liu2检查DO IP；

三，基站的数据添加

Lucent Technologies Inc.-Proprietary Use pursuant to Company Instructions

Page 3 of 11

主要在新局的MMC中加入基站的RCV表，基站主要加入CELL2;CMODEQP;BSEQP表,修改CEQFACE表。主要是下面红色部分需要修改。

Create new IPBH cell RCV form(R31 version)

==================================== CELL2 form-change and insert ==================================== FLEXENT Wirele SERIES 2 CELL(cell2)Screen 1 of 39 Networks

Cell Site Number............................*1)519 ACC Location Area ID........................+2)____ DCCH Virtual Mobile Location Area...........+3)____ CDMA Registration Zone ID...................+4)1 VZID/CID Cell ID............................5)____ Cellular Geographic Service Area............6)1 Switch Identification.......................@7)16 Virtual Switch Identification...............8)__ CDMA Switch Identification..................9)16 CDMA Virtual Switch Identification..........10)__ Cell Site Status............................12)e Location Equipped Antenna Faces.............13)0 Wait for Overhead Meage...................14)y Perform Pre-setup on Traffic Channel........15)y Traffic Channel Holding Timer(sec)..........16)15 TrFO/RTO on FPS Enabled.....................17)y RNC ID......................................18)__ Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele SERIES 2 CELL(cell2)Screen 4 of 39 Networks Cell 519

Cell Site Dial-Up NumberOffice Code..............101)___ Version Name.........................104)F2808DDPA Revision Number.................+107)1 CDMA Antenna(sec)...........................6)3600 CDMA Traffic Path(min)......................+8)____

Page 5 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

-CDMA Pilot Level(min).......................+9)____ Pilot Level Tolerance(db).......................+10)___ CDMA Test Radio Module Status....................11)u

Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA MODULAR CELL EQUIPAGE(cmodeqp)Screen 7 of 10 Networks

113)MCA Equipage:

MCA MCA Phy Tx Amp TxAmp TxAmp RevPwr MCPA SII MCPA Pwr Num Type Ant Numbers Asm Spare Thresh PwrUsage Offset 114)115)116)117)118)119)120)121)122)@123)124)125)126)[1] 1 chpam 1 1 __ __ __ __ __ 1 n ____ ___ ___ [2] 2 chpam 2 4 __ __ __ __ __ 1 n ____ ___ ___ [3] 3 chpam 3 7 __ __ __ __ __ 1 n ____ ___ ___ [4] 4 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [5] 5 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [6] 6 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [7] 7 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [8] 8 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [9] 9 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [10] 10 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [11] 11 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ [12] 12 ______ _ __ __ __ __ __ __ _ _ ____ ___ ___ Enter Review, Change-insert, Validate, screen#, or Print:

=================================== CEQFACE FORM-upgrade =================================== FLEXENT Wirele CELL EQUIPAGE FACE(ceqface)Screen 8 of 47 Networks Cell 152 Face 1 CDMA Information(Non-Power Control): Pilot PN Sequence Offset Index................................@111)57 Pilot PN Sequence Offset Index Increment Multiplier...........112)1 Pilot Detection Threshold(dB).................................113)-13.0 Pilot Drop Threshold(dB)......................................114)-15.0 Active Set vs Candidate Set Comparison Thresh(dB).............115)2.5 Active Set vs Candidate Set Comparison Thresh for Analog(dB)..116)2.5 Drop Timer.....................................................117)3 Search Window Size: Active Set and Candidate Set............118)7

Page 6 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

Neighbor Set............................119)7 Remaining Set...........................120)7 Cell(microseconds).....................121)32 Sector Size(miles).........................................@+122)____ Transmit Delay(microseconds)................................@123)0 Analog Handdown Physical Ant Face at Serving Sector...........124)_ Analog Equivalent Server Group at Serving Sector..............125)_ Base Station ID...............................................126)_____

Enter Review, Validate, screen#, or Print:

==================================== BTSEQP form-Change and insert ==================================== FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 1 of 26 Networks

Cell Site Number.............................*1)152 Aemblage Number............................*2)1 Backplane Serial Number......................3)08TG09069661 Spare CRC Controller Type...................@4)______ Channel Elements OOS Limits: Minor..........+5)___ Major..........+6)___ IA Enabled PAF 1.............................@7)n IA Enabled PAF 2.............................@8)n IA Enabled PAF 3.............................@9)n

Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 2 of 26 Networks Cell 152 Aemblage 1 CRC/CDM 1

CRC Status...................19)e 28)CDMA Digital Module DS1 Info.: CRC Controller Type.........@20)URC Status Type Data Rate Spare CRC Status.............21)u Num 29)31)32)Backhaul Mode...............@22)IP [1] e ___ __ Transmiion Facility Type...23)l [2] u ___ __ Flexent Software Rev Number.@+24)__ [3] u ___ __ Signaling Link Width.........25)_ [4] u ___ __ CRC Overload Control(%)....+26)__ [5] u ___ __ CRC Technology Type.........@27)1X [6] u ___ __ [7] u ___ __ [8] u ___ __ Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT

Page 7 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 6 of 26 Networks Cell 152 Aemblage 1 CRC/CDM 2

CRC Status...................139)e 148)CDMA Digital Module DS1 Info.: CRC Controller Type.........@140)URC-II Status Type Data Rate Spare CRC Status.............141)u Num 149)151)152)Backhaul Mode...............@142)SH [1] e ___ __ Transmiion Facility Type...143)l [2] e ___ __ Flexent Software Rev Number.@+144)__ [3] e ___ __ Signaling Link Width.........145)_ [4] e ___ __ CRC Overload Control(%)....+146)__ [5] u ___ __ CRC Technology Type.........@147)DO [6] u ___ __ [7] u ___ __ [8] u ___ __

Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 14 of 26 Networks Cell 152 Aemblage 1

379)CDMA Channel Unit(CCU)Information:

Row CCU CCU CCU CE CEs CCU @CCU Carriers Num Num Status TechType Max Enabled CRC Block a 380)@381)@382)@383)384)385)386)387)388)389)390)[ 1] 1 e 1X 128 128 1 1 __ __ __ __ __ [ 2] 2 e 1X ___ ___ 1 1 __ __ __ __ __ [ 3] 3 e DO1 ___ ___ 2 4 __ __ __ __ __

@CCU Carriers @CCU Carriers @CCU Carriers Block b for CE Max 256 Block c for CE Max 256 Block d for CE Max 256 391)392)393)394)395)396)397)398)399)400)401)402)403)404)405)406)407)408)[ 1] __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ [ 2] __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ [ 3] __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 19 of 26 Networks Cell 152 Aemblage 1 563)CBR Equipage:

Row CBR CBR CBR CBR CBR TX Port1 TX Port2 Phy Base Rx Imbl CBR CBR Num Num Stat CRCs CRCs CRCs MCA CLGC MCA CLGC Ant Cla Thrshld Type Ptnr

Page 8 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

564)565)566)567)568)@569)570)@571)572)@573)574)@575)@576)[1] 1 e 1 2 __ 1 0 __ _ 1 IS95 05.0 15MHz _ [2] 2 e 1 2 __ 2 0 __ _ 2 IS95 05.0 15MHz _ [3] 3 e 1 2 __ 3 0 __ _ 3 IS95 05.0 15MHz _ [4] 4 u __ __ __ __ _ __ _ _ ____ ____ 5MHz _ [5] 5 u __ __ __ __ _ __ _ _ ____ ____ 5MHz _ [6] 6 u __ __ __ __ _ __ _ _ ____ ____ 5MHz _

WARNING: REMOVE THE CBR PRIOR TO CHANGING ANY INFO FOR THAT CBR.FAILURE TO FOLLOW THE PROPER PROCEDURES MAY CORRUPT THE CELL OPERATION.Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 20 of 26 Networks Cell 152 Aemblage 1 584)CBR Equipage(Cont.):

Row CBR RxAmp RxAmp RxAmp Num Num Num1 Num2 Asm Num @585)@586)@587)[1] 1 1 2 1 [2] 2 3 4 1 [3] 3 5 6 1 [4] 4 __ __ _ [5] 5 __ __ _ [6] 6 __ __ _

Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 21 of 26 Networks Cell 152 Aemblage 1 594)CBR 1 Carrier Equipage:

Row Carr Carr Max Pging Acc Max Acc CBR Tx Port BCCH FCCCH REACH Num Carr Chnl Type Pwr Chnls Chnls Chnls Att Num Chnls Chnls Chnls @595)596)597)598)599)600)601)602)@603)604)605)606)[ 1] 4 37 DO 20.0 1 1 _ 02.0 1 0 0 0 [ 2] 1 283 1X 20.0 1 1 _ 02.0 1 0 0 0 [ 3] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0

Page 9 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

[ 4] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 5] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 6] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 7] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 8] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 9] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [10] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [11] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 WARNING: REMOVE THE CBR PRIOR TO CHANGING ANY INFO FOR THAT CBR.FAILURE TO FOLLOW THE PROPER PROCEDURES MAY CORRUPT THE CELL OPERATION.Enter Review, Change-insert, Validate, screen#, or Print:

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 22 of 26 Networks 610)CBR 2 Carrier Equipage:

Row Carr Carr Max Pging Acc Max Acc CBR Tx Port BCCH FCCCH REACH Num Carr Chnl Type Pwr Chnls Chnls Chnls Att Num Chnls Chnls Chnls @611)612)613)614)615)616)617)618)@619)620)621)622)[ 1] 4 37 DO 20.0 1 1 _ 02.0 1 0 0 0 [ 2] 1 283 1X 20.0 1 1 _ 02.0 1 0 0 0 [ 3] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 4] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 5] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 6] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 7] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 8] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 9] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [10] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [11] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 WARNING: REMOVE THE CBR PRIOR TO CHANGING ANY INFO FOR THAT CBR.FAILURE TO FOLLOW THE PROPER PROCEDURES MAY CORRUPT THE CELL OPERATION.Enter Review, Change-insert, Validate, screen#, or Print: 23

FLEXENT Wirele CDMA OneBTS MODCELL ASSEMBLAGE EQUIPAGE(btseqp)Screen 23 of 26 Networks 626)CBR 3 Carrier Equipage:

Row Carr Carr Max Pging Acc Max Acc CBR Tx Port BCCH FCCCH REACH Num Carr Chnl Type Pwr Chnls Chnls Chnls Att Num Chnls Chnls Chnls @627)628)629)630)631)632)633)634)@635)636)637)638)[ 1] 4 37 DO 20.0 1 1 _ 02.0 1 0 0 0 [ 2] 1 283 1X 20.0 1 1 _ 02.0 1 0 0 0 [ 3] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 4] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0

Page 10 of 11 Lucent Technologies Inc.-Proprietary

Use pursuant to Company Instructions

[ 5] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 6] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 7] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 8] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [ 9] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [10] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 [11] __ ____ __ _____ 1 1 _ ____ ____ 0 0 0 WARNING: REMOVE THE CBR PRIOR TO CHANGING ANY INFO FOR THAT CBR.FAILURE TO FOLLOW THE PROPER PROCEDURES MAY CORRUPT THE CELL OPERATION.Enter Review, Change-insert, Validate, screen#, or Print:

Lucent Technologies Inc.-Proprietary Use pursuant to Company Instructions

Page 11 of 11

华为PTN 950开站步骤小结

华为PTN 950开站步骤小结（对于所有的站，1-7、9、11、12、16都必需）确定光路通后：1、搜索并创建网元：确定网关的IP地址，文件->搜索->网元，搜索域中如果没有网关的IP（或网段）就添加进去......

cdma开站总结

2009年CDMA开站维护总结9224开站的任务做的一次小小总结：1、去基站时候要带好工具，板件，开站前向机房工程师打好招呼，开站的型号等，让他们做好数据。（先要知道该基站是下挂哪个局，......

爱立信开站小结

开站小结开新站的具体流程是：对要进行开通的基站提前申请，等待临沂市公司方面的数据方面的规划，等到要开新站具备开通条件时，我们便可到站配合临沂方面工程师开站。要开新站一般......

开站流程小结

开站流程小结开站流程如下：1、开站之前首先要在omcr上检查并确定该站是否被创建（一般创建BTS由局方完成）。2、BTS创建完后，根据实际需要创建小区，确定并输入LAC/CI值（LAC/CI由局方......

新开店步骤

一、在淘宝网注册自己的帐户 首先，我们先进入淘宝网的首页，打开这个网站后，点“免费注册”，可以选择手机号码注册或邮箱注册，我们一般选择“邮箱注册”，填好一切资料，点击“同意协......