SNMP v3 with trap Configuration Example(0517174227)_snmppdu报文格式解析

SNMP v3 with trap Configuration Example(0517174227)由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“snmppdu报文格式解析”。

SNMP v3 with trap Configuration Example

[Topology]

Vlan1

2.0.0.1/8

PC1: 2.0.0.2/8 eth2.1

[Configuration] R1

Step 1: enable snmp and set snmpv3 trap server

DGS-6600:15(config)#snmp-server

DGS-6600:15(config)#snmp-server enable traps

DGS-6600:15(config)# snmp-server host 2.0.0.2 version 3 noauth initial

Step 2: configure IP addre of VLAN

DGS-6600:15(config)#interface vlan1

DGS-6600:15(config-if)#ip addre 2.0.0.1/8

[Verification]

1)Use the following command to check the configuaton.DGS-6600:15#show snmp-server

SNMP Server: Enabled

System Name: N/A

Location: N/A

Contact: N/A

DGS-6600:15#show snmp host

Host IP AddreSNMP VersionCommunity NameSNMPv3 User Name----------------2.0.0.2v3noauthinitial

Total Entries: 1

2)plug cable into one of DGS-6600 port, and PC1 can receive link-up v3 trap meage.