论文写作之英文语法_英文论文写作语法

论文写作之英文语法由刀豆文库小编整理，希望给你工作、学习、生活带来方便，猜你可能喜欢“英文论文写作语法”。

学术论文的语言表达 2006-10-30 16:26 总则

语言风格清晰流畅的书面语言。注意向已发表的文章学习语言专业术语必须从该领域的文献中学习避免自创的新奇语句，应注意的问题：

一、时态

时态是个比较复杂的问题虽然有一般的规则，但往往在实际文章中很难把握总体的规则，已在前边讲过需要重申的是在同一段落中要避免时态跳跃详见学术论文的写作。最常见的描述一般现象的时态是一般现在时有时也用一般过去时或一般将来时，需要注意的语法In recent years 作时间状语时通常要用完成时。In recent years, Plesch and coworkers have concluded that many so-called cationic polymerizations do not proceed through intermediates of an ionic nature.二、数

数也有其复杂化，特别是在学术论文里有是很难顾及数上的逻辑，但一般不将逻辑上的问题视为语法错误。只须注意在一个句子中的数和谓语动词的统一即可.以下是需要注意的语法不规则变化的单复数。单数 复数

criterion criteria 依据 phenomenon phenomena 现象 medium media 介质 radius radii 半径 index indices 指数 appendix appendices 附录 stimulus stimuli 刺激 basis bases 基础 synthesis syntheses 合成 matrix matrices 基体

Novel biomaterials with improved, specific biological action are being developed using polymers that are responsive to environmental stimuli.一些数有特殊性的名词：data, kinetics 通常作复数名词；research, work: 不可数名词

The data in Table 1 are obtained from the reactions at different temperatures.The kinetics of polymerization within each droplet are the same as those for the corresponding bulk polymerization.Much research has been done to redirect the tropism of retroviruses by engineering the envelope glycoprotein.Most research on poly(ortho esters)has focused on the synthesis of polymers.一些结构的数 one of 复数名词单数 none of 复数名词复数

none of 单数名词/不可数名词单数 no 复数名词复数

no 单数名词/不可数名词单数

a kind of 单数名词单数 this/that kind of 单数名词单数 these kinds of 复数名词复数 复数名词 of this/that kind 复数 sort 与kind 类似 a type of 单数名词单数 a series of 复数名词复数 a cla of 复数名词复数 the number of 复数名词单数 a number of 复数名词复数

Ara-C is one of most important antitumor agents, especially used in the treatment of various leukaemias.One of poibilities for enhancing the pharmacological properties is to link it to a carrier.Biocompatibility is one of the main criteria for the selection of a particular biomaterial.Controlled drug delivery technology represents one of most rapid advancing areas of science in which chemists are contributing to human health care.Several models have been proposed but none appear to be generally applicable.None of the presently used ones are applied rigorously.Thus far no studies have conclusively demonstrated long-term value of any of the cardiac gene therap approaches.This type of termination is often referred to as spontaneous termination.A number of polymer backbones that are potentially degradable are detailed in the text.The number of mechanisms which have been proposed to explain the stereopecificity of Ziegler-Natta catalysts.* The number of 复数名词: 整个做主语时谓语应为单数;但此句的动词have 是从句的谓语 而从句是形容mechanisms.在其它的从句谓语中也是同样如: One of the mechanisms which have been……

A series of telomers reported in table 1 were then synthesized.A diverse range of mechanisms have been developed.Polymers are a promising cla of biomaterials that can be engineered to meet specific end-use requirements.The most important cla of poly(amides)for controlled release are the poly(amino acids).The majority of poly(anhydrides)are prepared by melt-condensation polymerization.A wide variety of natural and synthetic polymers have been used to fabricate tiue-engineering matrices.后面通常要用复数名词对可数名词而言 various different most all many several one of many of kinds of a number of the number of a(wide)variety of a cla of a series of a wide range of Dozens of different types of receptors are present on the average mammalian cell.In a number of special applications(e.g.contact lenses and skin-grafting materials), additional requirements such as transparency should be considered when selecting a polymer.Many of these transmembrane proteins are receptors.Some polymers are highly crystalline primarily because their structure is conductive to packing, while others are crystalline primarily because of the secondary forces.For still other polymers, both factors may be favorable for crystallization.形容可数名词的量词 a few many a number of 形容不可数名词的量词

a great/small/certain amount of a great/good deal of 形容可数和不可数名词均可的量词 a lot of lots of Although a few polymers may be completely amorphous and a few completely crystalline, most polymers are partially or semi-crystalline in character.The use of IPNs has received a great deal of attention in recent years and different kinds of IPN have been synthesized with different compositions.The major amount of work on size distributions has been on polyesters and polyimides.A sizeable amount work has been published on the copolymerizations of various cyclicmonomers.以下结构的谓语的数由前一个决定, as well as…… 由较靠近谓语动词的决定 not only……but also…… either……or…… neither……nor……

三、冠词

冠词是最易犯错误的地方一定要注意否则编辑的负担极重因为每句话都会用到冠词最普通的规则如下：

单数名词前一般要加冠词a , the 等 但有些情况可不加复数名词前一般可不加冠词也可加the, these, those.The molecular weight of a polymer is of prime importance in its synthesis and application.The rate constant can be expreed by an Arrhenius type relationship K = A e-E/RT Where A is the collision frequency factor, E the Arrhenius activation energy, and T the Kelvin temperature.A plot of lnK versus 1/T allows the determination of both E and A from the slope and intercept, respectively.When a water-insoluble or only slightly water-soluble monomer is added, a very small fraction diolves and goes into solution.A large but still small portion of the m onomer enters the interior hydrocarbon part of the micelles.The largest portion of the monomer is dispersed as monomer droplets.被修饰的名词前要加the: There has been a rapidly increasing effort in the last ten to fifteen years toward the synthesis of new polymers with markedly higher temperature resistance than those previo usly available.The catalysts usually must be prepared at the low temperatures since most of them become heterogeneous when prepared at or warmed up to the temperatures above abou t-40.四、从句分词不定式

这些是写作时常用且必须用到的结构一定要掌握在学术论文中从句分词不定式通常用来作修饰

Applications in the relatively new field of tiue engineering, where polymers are used to aist regeneration of three-dimensional tiue structures, are more and more int egrated with biological demands.There are three general synthetic approaches that have been used to produc e polymers with increased thermal stability.If certain symmetry requirements are met, the molecules are able to pack into an ordered, lattice arrangement and crystallization occurs.The temperature at which this occu rs is Tm.There are at least two mechanisms through which the infectivity of a vector can be blocked.Biodegradable polymers containing ˋ hydrolysable ˊ groups in their chains, which are susceptible to biodegradation to low molecular weight, nontoxic products, have also been considered for controlled drug delivery systems.Polymers poeing high strength, solvent and chemical resistance, and serviceability at high temperatures would find a variety of uses.The challenge facing cell and molecular biologists is to decipher how cellular events occur.A general problem encountered in many of the polymerization systems has been a difficulty in obtaining polymers of sufficiently high enough molecular weight to have reasonable strength properties.Another approach to obtain rigid polymer chains is by the synthesis of spiro polymers.五、标点

英文中一句话结束要用句号注意避免过长的句子这点与汉语中常用逗号的习惯不同，请注意以下结构的标点 …… such as A and B …… …… such as A, B and C …… …… , such as A, …… …… , for example, …… …… , for example …… …… ,e.g., …… …… ,i.e., …… ……, respectively.六、掌握一些学术论文常用的短语结构可大大降低写作的难度 In order to meet all of these criteria, the vector must deliver the gene accurately.To overcome this problem, it would be advantageous to pseudotypelentiviral vectors with targeted MLV envelopes.Besides identifying suitable proteases for targeting, the succe of this protease-targeting strategy relies on the acceibility of the linker to protease cleavage.We have focused our investigations on the in vitro and in vivo biological response of a mouse cell line.On the contrary, the homotelomer derivative 11 exhibits no substantial lo of cytotoxicity compared to free Ara-C.After more than three decades of development, in which numerous polymers have been used to replace body parts, clinical succe is still relatively rare.In some cases, polymeric materials for drug delivery must satisfy additional requirements, such as environmental responsivene(e.g.pH-or temperature dependent phase or volume transformations.)Owing to the nature of these interactions, surface modification strategies have been used to optimize specific surface properties.Several approaches to surface modification exist.In general, both chemical and physical modifications of the polymeric surface may significantly increase the biocompatibility.A host of new polymers have been developed specially for surgical applications, particularly drug delivery.For roughly the past three or four decades, biology has been undergoing a revolution toward a quantitative mechanistic understanding of cell and organism behavior.They offer improved mechanical properties and ease of synthesis.Specific gel systems are described in more detail in the following sections.Perhaps the strongest motivation for polymeric delivery systems is that many of the more recently discovered molecules require delivery at a very localized level due to their mechanism of action.A particular challenge in addreing materials iues for tiue engineering is that the biological procees are not yet understood well enough to allow a clear set of design parameters to be specified a priori.Over $20 billion is spent annually on therapeutic management of CHF treatments alone but the overall outcome is not highly succeful.Unle tiue-specific gene targeting techniques have been developed, intravenous injection of recombinant viral vectors is unlikely to be the choice of gene delivery due to systemic infection and low efficiency of gene transfer.In most instances, there is some molecular weight range for which a given polymer property will be optimum for a particular application.The control of molecular weight is eential for the practical application of a polymerization proce.Solid polymers differ from ordinary, low molecular weight compounds in the nature of their physical state or morphology.On the other hand, the highly flexible chain leads to very low values of Tg and Tm.Molecular symmetry of polymer chains also plays an important role in determining Tg and Tm.The reason for this is that the extent of crystallinity developed in a polymer is both kinetically and thermodynamically controlled while the melting temperature is only the rmodynamically controlled.This explains clearly why even the moderately high degree of syndiotacticity present in a polymer such as PMMA is not enough to allow it to crystallize extensively.Polymers vary widely in their mechanical behavior depending on the degree of crystallinity, the degree of crolinking, and the values of Tg and Tm.The general order of thermodynamic stability of different sized ring structures is, thus, given by 3,4,8 to 11

This corresponds to a two-or three-fold rate increase for a 10°C temperature increase.While the H values vary over a wide range for different monomers, the S values are insensitive to structure –being relatively constant within the range of 20-30cal/K mol.Some polymerizations show a rapid rise in Rp followed by a rapid decrease to the steady-state polymerization rate.Emulsion polymerization refers to a unique proce employed for some radical chain polymerization.To a large extent, the molecular weight and polymerization rate can be varied independently of each other.The system undergoes a very significant change after only a few percent of the total monomer has been converted to polymer.As a consequence the monomer droplets are no longer stable and will coalesce if agitation is stopped.Each of the curves in Fig.1 is relatively typical of emulsion polymerization behavior.The mechanism is not well understood due to the experimental difficulties involved in the study.The monomers have been arranged in Table 1 in their general order of reactivity.The claification of a ring-opening polymerization as a chain or step polymerization can be made on two bases.This is explainable in terms of the differences in the reaction mechanisms involved.学术论文中避免语言等错误的建议，在稿件寄出前请按以下程序分别检查各项内容：是否有人称和动词的不统一第三人称单数的动词是否都加了-s 2 是否有时态的错误 3 是否有数的错误 4 是否有冠词的错误 5 是否有单词拼写的错误 6 是否有大小写的错误 7 是否有标点的错误 8 是否有标题格式编号错误 9 是否有文献格式的错误是否有页码的错误有无 ┮ 颠倒 11 是否有寄信的地址姓名的拼写的错误